High quality dry mix for self-leveling floor Glims-S3X. The desire to equip their homes, creating in him a comfortable and cozy atmosphere, bring into the house warm, it is clear to every one of us. Primitive people warmed their caves, carpeting them with animal skins, civilized people are laid floor fillers 'Glims-S3X'. Poured floors are no longer a novelty that can afford only very wealthy people. To date, this method of heating space is quite affordable and widespread. The only thing that should be paid great attention – this device is a cement-sand screed for underfloor heating.

Buying even a highly reliable system of floor heating, you can still overshadow the anticipated expectations, making low-quality ties, resulting in the floor can crack and begin to issue specific 'crisp' sound. The main causes of cracking of cement-sand layer are substandard ingredients mix (cement, sand), the proportions of non-compliance or a bad batch of the solution has, an excessive amount of water in the solution and much more. All of this can be avoided by using ready-made mixes for special self-leveling floors, where all ingredients are dosed and used special polymer and mineral supplements. In this area, decided to help the end user only company 'Trade partnership' – the biggest Russian producer of self-leveling floor Glims-S3X. According to the company have established partnerships with the manufacturer of high-quality dry mixes under the brand name 'Glims'. And also attracted scientific capacity building of the university leading the country (MSSU), resulting in a unique on Product Specifications – dry mixture to warm floors 'Glims-S3X'.

Together with leading engineers and GLIMSa technologists and specialists mssu (IISS) has developed a detailed instruction preparation and application of the solution 'Glims-S3X' placement for filling the floor. The attractiveness of this product lies in the uniqueness specifications. Basic properties of self-leveling floor: high adhesion strength, operating temperature range from -50 to +70, the device does not require expansion joints, the thickness of unlimited, environmentally safe. Scope leveling floor: floor fillers are used for leveling uneven surfaces (roughness of 10 mm or more) and the device heated floors in dry and moderately humid (bathrooms in homes) premises. Dispensed manually (kneaded using a mixer) or by continuously running high-performance mortar pumps, such as Putzmeister MR25, MR35 Material consumption: 7.5 kg of dry mix to 1 m (with an average thickness 5 mm). More information about the self-leveling floor GLIMS-S3H. Self-leveling floor tu 5745-010-40397319-2003 – 0380 / 1 Production technology of works: 1. a) When the layer thickness of 15 mm: the ground surface must be dry, firm, free from dust, dirt, paint and oil stains, etc. Clean surface (cement screeds, concrete) must be primed with Primer glims. Highly absorbent grounds primed twice. Primer is a brush with hard bristles or spray, and b) at a layer thickness of 15 mm: the surface is dimmed film or waxed paper (as a separating layer), the joints are glued with tape around the perimeter of the room to the wall is attached metal edge strip. When possible entry of moisture from the ground up, you need before starting work to make waterproofing sealing slurries glims Vodostop. 2. Beacons for self-leveling floors set the overall level of the floor. 3. Preparation of solution: Manual method: dry powder fill into clean water at the rate of 0,24-0,25 liters of water per 1 kg of dry mixture (6,2-6,3 liters per bag of 25 kg mixture) and mix thoroughly with a mixer (with a special attachment) until smooth state. Solution stand for 2-3 minutes and then re- mix well. The solution is in working order at least 15 minutes after mixing; Mechanized way: a slurry (Putzmeister MR25) or their analogues, it is desirable to use Rotomix8 settings on the water depends on the screw pair. 4. The solution was poured evenly over the surface of the floor and further accelerate the valve inlet mixture. Carry out further work with the use of decorative materials, subject to bending when exposed to moisture, after complete drying of the floor (7 – 14 days depending on the thickness of the layer under normal room conditions). Device features heated floors, depending on the thickness of the heated elements must be at least 20 mm. Before switching on the underfloor heating self-leveling floor must be completely dry during application and drying of the material substrate temperatures and ambient air must not be below +5 C Packaging: paper bags of 25 and 40 kg (net) Shelf life self-leveling floors: 12 months from the date of manufacture. Bags with a mixture of transported and stored under conditions that ensure the safety of packaging and protection from getting wet. There are different polymer and mineral supplements. With them, with minimal use of water can achieve very good ductility of the solution. That is, we came to the conclusion that in terms of flow of water to dry mixture can, bypassing all subtlety and subterfuge technology to promote products, to determine how much dry mix is good, no matter what its manufacturer claims. In turn, it should be noted that among the recommended mix for the warm floors based cement binder, the dry mix 'Glims-S3X' consumption of water for mixing the most basic. You can verify this by comparing the specifications of dry mixtures of leading manufacturers, which are written on the packaging and are publicly available. And finally, you should select the last important aspect inherent in the dry mixture 'Glims-S3X'. It is known that when heated screed is expanding, and cooling – is shrinking. In this regard, the dry mix ' Glims-S3X 'have developed a unique mineral supplements, and calculate their optimal proportions, the use of which in the mixture gave the most minimal coefficient of thermal expansion. For the convenience of the dry mixture to underfloor heating 'Glims-S3X' jointly developed to the preparation and use of dry mixes 'Glims-S3X' under floor heating device 'Glims'. Following paragraphs of this instruction is guaranteed high performance screed for floor heating. Due to the presence of a mixture of special minerals and polymer additives reduced linear expansion ties that may arise when it is heated. Thus, getting heated floors, and, accordingly, a mixture of the device under these ties, it is imperative to take into account the factors outlined above, or go the easiest way – to buy a heated floor and a mixture for its devices Glims-S3X, so more than what you'll be very pleasantly surprised at their reasonable prices.